J&N Feeders
To order any products, feel free to stop by our show room or call us.
3366 FM 2292
Corpus Christi, Texas 78415
Local: 361-387-3001
Toll Free: 877-452-8489
Hours of Operation
Mon-Fri 10am - 5pm
Sat by appt. only
Closed Sunday & Holidays
|
Road/Trail Feeders
When it comes to feeding the road or the trail, J&N Feeders Road and Trail Feeders are up to the job. The hoppers are designed just as the standard J&N Feeders Broadcast hopper, just smaller. The Road Feeder fits a standard 2” receiver hitch and features the Eliminator Spinner Plate and includes a remote switch with aux power adaptor. The Trail Feeder is exactly like the J&N 300lb. Winch-Up Feeder just 1/3 the size, holding 100lbs. of corn, it is perfect for scouting a new area or working a game trail in thick brush or woods.
All J&N Feeders Road and Trail Feeders come with a 5 year limited warranty.
|
100 Lb. Road Feeder with Switch
- 18 guage (.047 thick) galvanized hopper with fully welded seams, silicon-sealed bolt holes, and a 20 guage galvanized lid on top make hopper watertight
- Comes standard w/ 12 volt motor and 22 ft Remote Switch
- Shield to protect tailgate and directs feed to road
- Switch that plugs in cigarette lighter
Price: $275 Standard
$295 w/ Eliminator Spinner Plate
|
|
100 Lb. Trail-Hanging Feeder (great for hanging from a tree)
- 18 guage (.047 thick) galvanized hopper with fully welded seams, silicon-sealed bolt holes, and a 20 guage galvanized lid on top make hopper watertight
- Four leg stubs to protect J&N Feeders' Time Control Box from damage when feeder is lowered to ground
- 1 inch galvanized hanging bar with 2" pulley, winch, and hanging chain not included, sold separately
- 12-volt timer unit: complete with motor, timer, SPINMASTER spinner plate, and battery
- * 6-volt available upon request
- † Solar panel upgrade available
Price: $335
$375 w/ solar panel
|
Winch-Up Game Feeders
J&N Feeders 300lb. Winch-Up Broadcast feeders are built with simple, durable and long lasting in mind. The hopper is made of 18 gauge galvanized sheet metal, has fully welded seams, includes a hanging bar with pulley wheel, rain gutters on all sides, (4) bolt-on ½” sch. 40 galvanized leg stubs made to keep your timer box from being crushed when filling the hopper, and a 20 gauge galvanized lid with locking latch.
In addition to the hopper, your J&N Feeders 300lb. Winch-Up Broadcast model will come with a Timer Control Box which houses the electronics, motor and battery.
The Control Box is made from 20 gauge galvanized sheet metal and uses two ½” All-thread rods to attach the Box to the Hopper. The Timer Control Box includes: 12v motor with ¼” shaft; 12v Rechargeable battery; 12v solar panel with mounting bracket; SpinMaster Spinner Plate; and your choice of the timers. (Timer choices include: “The Timer”, HCR Electronics Variable Rate Timer and/or HCR Electronics USB Timer.)
The whole system is supported by a galvanized “Quad-pod Crown” that uses four ten foot legs and a D&L 800lb brake winch. The hopper is designed to fit snug in the crown and hold the hopper in place and by the utilizing a three pulley wheel system, your feed will be filled and in place in no time.
All J&N Feeders 300lb. Winch-Up Feeders come with a 5 year limited warranty.
|
300 Lb. Winch-Up Feeder
- 18 guage (.047 thick) galvanized hopper with fully welded seams, silicon-sealed bolt holes, rain gutters, and a 20 guage galvanized lid on top make hopper watertight. Four 1/2" galvanized legs to protect your Timer Control Box when adding feed.
- 1" sch. 40 galvanized quad pod hanging system with four 10' legs
- 800 lb. Dutton-Lainson Brake Winch
- 12-volt timer unit: complete with motor, timer, SPINMASTER spinner plate, and battery
- 5-year Limited Manafactures Warranty on all J&N Feeders
- * 6-volt available upon request
- † Solar panel upgrade available
Price: $725 includes solar panel upgrade
|
|
